Residential flooring installation is much more than just nailing some carpet to the floor. The project involves a careful process that includes the use of a variety of tools, safety considerations, and attention to detail. After you pick your lvt flooring in lafayette la, there are a number of steps that professionals go through to install it.
First, the floor is covered with drop cloths to catch debris and protect surrounding areas from stains. Second, a tape measure and chalk line are used to mark out square cuts for the size of tile or wood flooring that will be installed in each room (or area). Next, a scrub brush is used to clean away any dirt or grime from the subfloor. The scrub brush is used in small areas, then a mop and duster are used on all open floor areas.
When the surface has been thoroughly scrubbed, tools required for the next phase are gathered: safety glasses, caulking gun and a caulk knife, hammer, cold chisel and pry bar. Planks or tiles may need to be cut to fit around obstacles such as outlets or baseboards (usually done by someone other than the flooring installer). The professional then pries up one plank at a time to secure the subfloor from areas around which it will not be installed.
Then, a layer of underlayment is placed on the floor, then a layer of padding (1/4-inch thick) that covers it. Carpet or wood planks are laid over the padding and secured to the subfloor with staples. The professional may use a stapler, hand tacker or nail gun for this task. This is repeated for each room that needs to be covered. Once the flooring has been installed, an inspection of all seams and installation areas is performed from below — only when everything looks good will the work be complete.